Other Servo Mechanical Products

Mechanical Parts for RS601CR

Joint Ball Set for RS601CR

<BS3289 JOINT BALL SET>

This part is used to connect two RS601CR servos so that their axes are perpendicular to each other.
By combining it with the drive spacer (BS3298), the range of motion can be increased.

1 × Joint Ball Body
2 × Joint Ball Mounting Screws (M3 × 8)

Nylon Nut for RS601CR

<BS3290 NYLON NUT 2.3>

This is a nylon nut for the screws used to secure the RS601CR body.

20 × M2.3 Nylon Nuts

Servo Mounting Screws for RS601CR (Long / Short)

These screws are used to secure the RS601CR body to a robot frame or similar structure.
Please use these products in place of the screws supplied with the RS601CR body.

20 × BS3291 M2.3 × 32.5 Screws
20 × BS3292 M2.3 × 54 Screws

Frame Mounting Screws for RS601CR

<BS3293 PMS 2x5 Ni FE>

These screws are used to attach the servo horn for the RS601CR to a robot frame or similar structure.

40 × M2 × 5 Screws

Flanged Bearing Set for RS601CR Joint Ball

<BS3294 FLANGE BEARING 850>

This bearing supports the shaft on the side opposite the servo when the joint ball (BS3289) is used in a dual-shaft support structure.

1 × Flanged Ball Bearing
1 × M3 × 8 Screw

Aluminum Shafts for RS601CR (Short / Long)

These are aluminum shafts that fit inside the output shaft of the RS601CR.
The aluminum shaft supplied as a standard accessory with the RS601CR body is BS3296 (short).

BS3297 (long) is required when attaching aluminum horns to both sides of the RS601CR or when using a drive spacer to increase the range of motion.

2 × BS3296 Aluminum Shafts (Short)
2 × BS3297 Aluminum Shafts (Long)

Drive Spacer for RS601CR

<BS3298 RS601CR DRIVE SPACER>

This part is inserted between the RS601CR body and the servo horn or joint ball to increase the range of motion.
Using the drive spacer, BS3297 aluminum shaft (long) is required.

2 × Drive Spacers

Servo Horn Mounting Screws / Joint Ball Mounting Screws for RS601CR

These screws are used to attach the servo horn or joint ball to the output shaft (aluminum shaft) of the RS601CR.
BS3299 includes a screw, a spring washer, and a plain washer, while BS3300 includes a screw and a spring washer.
Be sure to use BS3300 when attaching the joint ball.

20 × BS3299 Servo Horn Mounting Screws (M3 × 8)
20 × BS3300 Joint Ball Mounting Screws (M3 × 8)

Mechanical Parts for RS4xx Series

Bottom Case Unit with Shaft for RS401CR to RS404PD

This is a bottom case set with shaft for providing a dual-shaft support structure for the RS401CR to RS404PD.
The included free horn rotates freely on the shaft of the bottom case and does not transmit output.

1 × Bottom Case with Shaft for BS3311 RS401CR / RS403PR
1 × Bottom Case with Shaft for BS3312 RS402CD / RS404PD
2 × Flanged Ball Bearings
1 × Free Horn
1 × Retaining Screw for Free Horn (M3 × 8 tapping screw)
4 × Mounting Screws for Free Horn (M2 × 4 tapping screws)

Free Horn Set for RS405CB

<BS0167 RS405CB FREE HORN SET>

This is a set consisting of the opposite-side shaft part and free horn supplied as standard accessories for the RS405CB.
These parts are not included in BS3391 RS405CB CASE SET.
The free horn and flanged ball bearings are common with BS3311 and BS3312.

1 × Opposite-Side Shaft Part for RS405CB
2 × Flanged Ball Bearings
1 × Free Horn
1 × Retaining Screw for Free Horn (M3 × 10 tapping screw)

Mechanical Parts for RS30x Series

Free Horn for RS3xx Series (5 pcs.)

<BS0168 RS30x FREE HORN SET>

This is the free horn supplied as a standard accessory for the RS303MR / RS304MD (5 pcs.).
By combining it with BS3397, it can also be used with the RS301CR / RS302CD.
It can also be used with the RS204MD.

5 × Free Horns for RS3xx Series