Cables

Servo connection cables

For RS601CR

<BS3303 SX SPIRAL LEAD 100>(wire length: 100 mm)
<BS3304 SX SPIRAL LEAD 150>(wire length: 150 mm)
<BS3305 SX SPIRAL LEAD 200>(wire length: 200 mm)
<BS3306 SX SPIRAL LEAD 300>(wire length: 300 mm)

These cables are used to connect the RS601CR to a relay hub (TB-xxxxEH).
BS3306 is supplied as a standard accessory with the RS601CR.

2 × Cables with Connectors on Both Ends (JST EH / JAM SC)

For RS4xx Series

<BC0078 CC-E4E4-150>(wire length: 150 mm)*Discontinued

<BC0093 SENSOR LEAD 200 TOP>(wire length: 200 mm)

This is the cable supplied as a standard accessory for the RS405CB.
It can also be used to connect the RPU-10 or RSC-U485 to a relay hub (TB-xxxxEH).

1 × Cable with Connectors on Both Ends (JST EH on both ends)

For RS2xx Series and RS318CD (ADH to PWM Control Connector)

<BB1182 SERVO CABLE AD-RC B 150>(wire length: 150 mm)
<BB1183 SERVO CABLE AD-RC B 300>(wire length: 300 mm)

These cables are used in combination with the TB22PP hub or similar products.

1 × Cable with Connectors on Both Ends (JST ADH / connector for PWM control servos)

For RS2xx Series and RS318CD (ADH to EH)

<BB1184 SERVO CABLE AD-EH B 150>(wire length: 150 mm)
<BB1185 SERVO CABLE AD-EH B 300>(wire length: 300 mm)

These cables are used in combination with the TB-RV71EH (3W) or TB-EH41EH.

1 × Cable with Connectors on Both Ends (JST ADH / JST EH)

For RS2xx Series and RS318CD (ADH to ADH)

<BB1186 SERVO CABLE AD-AD B 70>(wire length: 70 mm)
<BB1187 SERVO CABLE AD-AD B 150>(wire length: 150 mm)
<BB1188 SERVO CABLE AD-AD B 300>(wire length: 300 mm)

These cables are used when connecting RS204MD or RS318CD units together, or in combination with the TB41AD.
BB1186 is supplied as a standard accessory with the RS204MD.

1 × Cable with Connectors on Both Ends (JST ADH on both ends)

For RS2xx Series and RS318CD (ADH on One End)

<BB1189 SERVO CABLE AD-C B 300>(wire length: 300 mm)

This cable is used when soldering the cable directly to a circuit board.

1 × Cable with Connector on One End (JST ADH / no connector on the other end)

Others / For Relay Box Connection

<BS3307 SENSOR LEAD 300>(wire length: 300 mm)

This cable is used to connect the RPU-10 or RSC-U485 to a relay hub (TB-xxxxEH), or to connect relay hubs to each other.

1 × Cable with Connectors on Both Ends (JST EH on both ends)

<BB0131 CC-E3P3-300>(wire length: 300 mm)

This cable is used to connect the BB0132 TB22PP to other hubs (TB-xxxxEH).
It can also be used when connecting the RS405CB in PWM control mode.

1 × 3-Wire Cable with Connectors on Both Ends (JST EH / connector for PWM control servos)